Search found 14 matches

by curtis_layton
Thu May 07, 2020 9:28 am
Forum: Actuators
Topic: Actuator modules not getting IP
Replies: 3
Views: 4353

Re: Actuator modules not getting IP

Hi, The first thing that I would do is the verify the physical network connections between the actuators. Each actuator has two Ethernet ports and each port has a set of LEDs that indicate that that port is active. Make sure that each port that has a network cable plugged into it has active LEDs whe...
by curtis_layton
Sun Apr 19, 2020 8:54 am
Forum: Mobile I/O
Topic: Mobile I/O I2C
Replies: 2
Views: 4591

Re: Mobile I/O I2C

Hello, Currently the I/O board does not support I2C, although you are correct that the hardware is there. We have talked about incorporating this functionality in the future but so far it as stayed pretty far down the priority list. What type of I2C device are you trying to interface to? Any feedbac...
by curtis_layton
Fri Apr 17, 2020 9:55 am
Forum: Scope
Topic: Connecting to Modules Using Static IP
Replies: 1
Views: 4839

Re: Connecting to Modules Using Static IP

In order to use the procedure you mentioned to communicate with the actuators you must also set a static IP for the Ethernet adapter on your computer that is connected to the actuator. Set it to something other than 10.11.12.13 such as 10.11.12.2 with a subnet mask of 255.255.255.0. The gateway and ...
by curtis_layton
Fri Apr 10, 2020 5:34 pm
Forum: Introductions | New user? Introduce yourself!
Topic: Hi! I'm Curtis.
Replies: 0
Views: 11857

Hi! I'm Curtis.

Hi Forum, I am one of the founders of HEBI along with Dave, Matt, Florian and Howie. I grew up in Vermont and came to Pittsburgh in 2007 to go to Carnegie Mellon where I majored in ECE (Electrical and Computer Engineering) with a focus on embedded systems. After graduating I had a brief stint at Qin...