Hi here,
I want to connet a Lidar senser for Igor. The communication mode of the Lidar sensor is Ethernet.
There is a USB port for users. I wonder if I can use a usb-to-ethernet converter.
Would the converter influence the communication between actuators and on-board computer?
Thank you
Any help would be greatly appreciated.
Connet Lidar sensor for Igor
- curtis_layton
- HEBI Official
- Posts: 14
- Joined: Fri Mar 27, 2020 6:55 pm
- Location: Pittsburgh, PA
- Contact:
Re: Connet Lidar sensor for Igor
Hi,
Using a USB to Ethernet adapter will work fine in this situation and it should not have any negative effect on the actuators as it will be on a separate network.
Thank you,
- Curtis
Using a USB to Ethernet adapter will work fine in this situation and it should not have any negative effect on the actuators as it will be on a separate network.
Thank you,
- Curtis
Re: Connet Lidar sensor for Igor
Hi,curtis_layton wrote: ↑Wed Dec 09, 2020 12:45 pmHi,
Using a USB to Ethernet adapter will work fine in this situation and it should not have any negative effect on the actuators as it will be on a separate network.
Thank you,
- Curtis
Thanks for your prompt response. It helps me great!
Wei