Connet Lidar sensor for Igor

Questions, comments, and issues that aren't related to a specific product
Post Reply
zhuwei996
Posts: 14
Joined: Wed Dec 09, 2020 1:58 am
Location: Japan

Connet Lidar sensor for Igor

Post by zhuwei996 » Wed Dec 09, 2020 2:27 am

Hi here,

I want to connet a Lidar senser for Igor. The communication mode of the Lidar sensor is Ethernet.
There is a USB port for users. I wonder if I can use a usb-to-ethernet converter.
Would the converter influence the communication between actuators and on-board computer?

Thank you

Any help would be greatly appreciated.
User avatar
curtis_layton
HEBI Official
Posts: 14
Joined: Fri Mar 27, 2020 6:55 pm
Location: Pittsburgh, PA
Contact:

Re: Connet Lidar sensor for Igor

Post by curtis_layton » Wed Dec 09, 2020 12:45 pm

Hi,

Using a USB to Ethernet adapter will work fine in this situation and it should not have any negative effect on the actuators as it will be on a separate network.

Thank you,

- Curtis
zhuwei996
Posts: 14
Joined: Wed Dec 09, 2020 1:58 am
Location: Japan

Re: Connet Lidar sensor for Igor

Post by zhuwei996 » Wed Dec 09, 2020 6:52 pm

curtis_layton wrote:
Wed Dec 09, 2020 12:45 pm
Hi,

Using a USB to Ethernet adapter will work fine in this situation and it should not have any negative effect on the actuators as it will be on a separate network.

Thank you,

- Curtis
Hi,

Thanks for your prompt response. It helps me great!

Wei
Post Reply