How high can a Hexapod climb?

Hexapods, Balancing Robots, Mobile Bases, anything else
Post Reply
User avatar
hebi_newbie
Posts: 34
Joined: Wed Oct 02, 2019 4:41 pm

How high can a Hexapod climb?

Post by hebi_newbie » Thu Jul 01, 2021 11:58 am

What is the maximum step height of the X-Series Daisy and R-Series Lily hexapods? Are they able to climb slopes, and if so, how steep?

User avatar
hebi_guru
Site Admin
Posts: 27
Joined: Tue Oct 01, 2019 2:50 pm

Re: How high can a Hexapod climb?

Post by hebi_guru » Thu Jul 01, 2021 12:00 pm

Daisy/Lily should be able to climb a single step, or a set of multiple steps, up to ~300mm in height. If climbing a set of steps, I don’t think anything with a pitch steeper than 45-deg would be likely to work, regardless of individual step height.

Please note, this would require custom software work on the step controller, as the example code we provide is designed for walking on flat ground and passively handling small obstacles. The estimates above are for the standard configuration of Daisy, but using X8-16s at the bases instead of X8-9s.

It may be worth noting that since the system is modular, custom development is also possible. With an additional degree of freedom on each leg, and with adjusted leg lengths, larger obstacles may be possible. Please reach out if you would like to see how Daisy or Lily could be reconfigured for your purposes!
Post Reply