Motor Temperature LED Status

X-Series and R-Series Actuators
Post Reply
User avatar
dave_rollinson
HEBI Official
Posts: 41
Joined: Tue Dec 31, 2019 11:58 am

Motor Temperature LED Status

Post by dave_rollinson » Tue May 26, 2020 5:36 pm

There was a question recently about at what motor winding temperature does the actuator status LED start to blink red, indicating the thermal safety controller is active.
https://docs.hebi.us/core_concepts.html ... atus-codes

On the X-Series and R-Series actuators, the LED starts blinking at 130 deg-C. Above this, the internal thermal safety control will limit power to the motor to keep the winding temperature below 155 deg-C.
Post Reply