There was a question recently about at what motor winding temperature does the actuator status LED start to blink red, indicating the thermal safety controller is active.
https://docs.hebi.us/core_concepts.html ... atus-codes
On the X-Series and R-Series actuators, the LED starts blinking at 130 deg-C. Above this, the internal thermal safety control will limit power to the motor to keep the winding temperature below 155 deg-C.
Motor Temperature LED Status
- dave_rollinson
- HEBI Official
- Posts: 41
- Joined: Tue Dec 31, 2019 11:58 am