Scope on Raspberry Pi

A cross-platform application for configuring, controlling, debugging, and monitoring HEBI hardware products.
Post Reply
User avatar
hebi_newbie
Posts: 34
Joined: Wed Oct 02, 2019 4:41 pm

Scope on Raspberry Pi

Post by hebi_newbie » Tue Dec 31, 2019 3:56 pm

I want to know if the Scope app can be installed on a Raspberry Pi after setting cross compilation for 64bit? I am using the X-series actuators.
User avatar
dave_rollinson
HEBI Official
Posts: 41
Joined: Tue Dec 31, 2019 11:58 am

Re: Scope on Raspberry Pi

Post by dave_rollinson » Tue Dec 31, 2019 4:40 pm

Scope currently does not support Raspberry Pi or other ARM-based platforms.

This is in part because there are no pre-built binaries (jmods) for OpenJFX:
https://gluonhq.com/products/javafx/
User avatar
dave_rollinson
HEBI Official
Posts: 41
Joined: Tue Dec 31, 2019 11:58 am

Re: Scope on Raspberry Pi

Post by dave_rollinson » Tue Dec 31, 2019 4:40 pm

Also, just in case you are not aware I'd also like to point out that Scope is independent from the APIs and can be run on any computer on the same network.

So as long as you are connected, you can run Scope from your development machine even if the robot is controlled from a Raspberry Pi.
Post Reply